Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H818-40-H1-16
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series:||GR Series - Ironman Worm Gear Reducers||Output Key:||1/4 x 3.00|
|Input Keyway:||3/16 X 1.38||Output HP:||0.44|
|Gear Type:||Worm||Reducer Style:||Worm - Right Angle|
|Gear Drive Reductions:||Single||Bore Code:||16|
|Output Shaft Assembly Code:||H1||Ratio:||40:1|
|Output RPM:||43||Product Type:||Right Angle|
|Reducer:||Worm - Right Angle||Output Torque:||634|
|Housing material:||Cast Iron||Assembly:||H-H1|
|Input HP:||0.609||Center distance (inch):||1.75|
|Service Factor:||1||Ratio Range:||40:1|
|No. of Gear Reductions:||Single||Input Style:||Shaft|
|Shaft Seal Material:||Viton||Mounting Style:||Shaft Mount|
|Output Shaft Orientation:||H1||Input RPM:||1,750|
|Output Style:||H1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output shaft:||Hollow Bore||Series Style:||GR-H-H1|
|Model Code:||H818||Output Hollow Shaft Diameter (in):||1.000 in|
|Input Diameter (in):||0.625 in|