Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-WBMQ815-10-R-56--
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Model Code:||WBMQ815||Input Style:||C-face Quill|
|Input RPM:||1,750||Shaft Seal Material:||Viton|
|Ratio Range:||10:1||Overhung Load:||860|
|Product Type:||Right Angle||Mounting Style:||Base|
|Output Torque:||402||Input HP:||1.279|
|Output Diameter (in):||0.750 in||Center distance (inch):||1.54|
|Series:||GR Series - Ironman Worm Gear Reducers||Series Style:||GR-WBMQ-R|
|Output RPM:||175||Gear Type:||Worm|
|Output Key:||3/16 x 1.50||Output Style:||R|
|Frame Size:||56||Input Keyway (C Face):||3/16 x 3/32|
|Housing material:||Cast Iron||Assembly:||WBMQ-R|
|Service Factor:||1||Output Shaft Assembly Code:||R|
|Output Shaft Orientation:||R||No. of Gear Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||0.625|
|Gear Drive Reductions:||Single||Ratio:||10:1|
|Output shaft:||Shaft||Output HP:||1.116|
|Input Diameter (in):||0.625 in||Reducer:||Worm - Right Angle|
|Reducer Style:||Worm - Right Angle|