Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM815-80-L-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series:||GR Series - Ironman Worm Gear Reducers||Assembly:||BM-L|
|Input RPM:||1,750||Shaft Seal Material:||Viton|
|Input Style:||C-Face Coupled||Gear Drive Reductions:||Single|
|Output shaft:||Shaft||Service Factor:||1|
|Output Diameter (in):||0.750 in||Input HP:||0.204|
|Input Diameter (in):||0.875 in||Model Code:||BM815|
|Ratio Range:||80:1||Reducer:||Worm - Right Angle|
|Housing material:||Cast Iron||Reducer Style:||Worm - Right Angle|
|No. of Gear Reductions:||Single||Ratio:||80:1|
|Center distance (inch):||1.54||Gear Type:||Worm|
|Input Bore (C Face):||0.875||Output HP:||0.093|
|Product Type:||Right Angle||Input Keyway (C Face):||3/16 x 3/32|
|Output Shaft Assembly Code:||L||Frame Size:||140|
|Series Style:||GR-BM-L||Output Shaft Orientation:||L|
|Output Torque:||269||Mounting Style:||Base|
|Output RPM:||21||Output Style:||L|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Overhung Load:||860|
|Output Key:||3/16 x 1.50|