Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H813-60-H1-10
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Mounting Style:||Shaft Mount||Input HP:||0.246|
|No. of Gear Reductions:||Single||Shaft Seal Material:||Viton|
|Input Style:||Shaft||Series:||GR Series - Ironman Worm Gear Reducers|
|Input RPM:||1,750||Service Factor:||1|
|Series Style:||GR-H-H1||Output HP:||0.145|
|Output Hollow Shaft Diameter (in):||0.625 in||Reducer Style:||Worm - Right Angle|
|Product Type:||Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Key:||3/16 X 1.50||Gear Drive Reductions:||Single|
|Reducer:||Worm - Right Angle||Input Keyway:||1/8 x 1.00|
|Output Torque:||313||Input Diameter (in):||0.5 in|
|Model Code:||H813||Ratio Range:||60:1|
|Center distance (inch):||1.33||Output RPM:||29|
|Output shaft:||Hollow Bore||Output Shaft Assembly Code:||H1|
|Housing material:||Cast Iron||Bore Code:||10|
|Output Shaft Orientation:||H1|