Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H813-50-H1-10
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input RPM:||1,750||Bore Code:||10|
|Input Style:||Shaft||Output Shaft Assembly Code:||H1|
|Output Style:||H1||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output HP:||0.182||Output RPM:||35|
|Series Code:||GR||Output Shaft Orientation:||H1|
|Reducer Style:||Worm - Right Angle||Output Torque:||327|
|Series Style:||GR-H-H1||Output Key:||3/16 X 1.50|
|Mounting Style:||Shaft Mount||Input HP:||0.285|
|Service Factor:||1||Product Type:||Right Angle|
|Housing material:||Cast Iron||Assembly:||H-H1|
|Output shaft:||Hollow Bore||Center distance (inch):||1.33|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Series:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Model Code:||H813|
|Input Diameter (in):||0.5 in||Shaft Seal Material:||Viton|
|Gear Drive Reductions:||Single||Output Hollow Shaft Diameter (in):||0.625 in|
|Ratio:||50:1||No. of Gear Reductions:||Single|
|Gear Type:||Worm||Ratio Range:||50:1|
|Input Keyway:||1/8 x 1.00|