Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H813-10-H1-10
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Center distance (inch):||1.33||Output Hollow Shaft Diameter (in):||0.625 in|
|Input RPM:||1,750||Reducer:||Worm - Right Angle|
|Assembly:||H-H1||Output shaft:||Hollow Bore|
|Series Style:||GR-H-H1||Gear Type:||Worm|
|Reducer Style:||Worm - Right Angle||No. of Gear Reductions:||Single|
|Mounting Style:||Shaft Mount||Ratio:||10:1|
|Service Factor:||1||Output RPM:||175|
|Bore Code:||10||Series:||GR Series - Ironman Worm Gear Reducers|
|Ratio Range:||10:1||Output Style:||H1|
|Gear Drive Reductions:||Single||Output HP:||0.729|
|Output Shaft Orientation:||H1||Model Code:||H813|
|Product Type:||Right Angle||Output Key:||3/16 X 1.50|
|Input HP:||0.823||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Shaft Seal Material:||Viton||Output Shaft Assembly Code:||H1|
|Input Diameter (in):||0.5 in||Input Style:||Shaft|
|Output Torque:||263||Housing material:||Cast Iron|
|Input Keyway:||1/8 x 1.00|