Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ813-30-D-48
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output RPM:||58||Service Factor:||1|
|Model Code:||BMQ813||Input Diameter (in):||0.5 in|
|Overhung Load:||700||Reducer Style:||Worm - Right Angle|
|Gear Drive Reductions:||Single||Output Shaft Assembly Code:||D|
|Mounting Style:||Base||Input Keyway (C Face):||1/8 x 1/16|
|Gear Type:||Worm||Output Shaft Orientation:||D|
|Series:||GR Series - Ironman Worm Gear Reducers||Center distance (inch):||1.33|
|Frame Size:||48||Reducer:||Worm - Right Angle|
|Series Style:||GR-BMQ-D||Ratio Range:||30:1|
|Input Style:||C-face Quill||Output HP:||0.29|
|Housing material:||Cast Iron||Output Diameter (in):||0.625 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Key:||3/16 x 1.50|
|Ratio:||30:1||Product Type:||Right Angle|
|Input HP:||0.395||Output shaft:||Shaft|
|Shaft Seal Material:||Viton||Input RPM:||1,750|
|No. of Gear Reductions:||Single||Output Style:||D|
|Input Bore (C Face):||0.5||Output Torque:||314|