Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ813-100-R-48
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Style:||GR-BMQ-R||Input HP:||0.084|
|Overhung Load:||700||Reducer Style:||Worm - Right Angle|
|Keyway:||1/8 X 1/16||Output Shaft Assembly Code:||R|
|Output HP:||0.04||Output Shaft Orientation:||R|
|Output Torque:||143||Input Style:||C-face Quill|
|Mounting Style:||Base||Frame Size:||48|
|Output RPM:||17||Output Style:||R|
|No. of Gear Reductions:||Single||Series Code:||GR|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Input RPM:||1,750|
|Output Key:||3/16 X 1.50||Gear Drive Reductions:||Single|
|Input Diameter (in):||0.5 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Output Diameter (in):||0.625 in||Ratio:||100:1|
|Input Quill Diameter (in):||0.5 in||Service Factor:||1|
|Input Keyway (C Face):||1/8 x 1/16||Output shaft:||Shaft|
|Gear Type:||Worm||Housing material:||Cast Iron|
|Product Type:||Right Angle||Model Code:||BMQ813|
|Assembly:||BMQ-R||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||0.5||Shaft Seal Material:||Viton|
|Ratio Range:||100:1 to 250:1||Center distance (inch):||1.33|
|Reducer:||Worm - Right Angle|