Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM813-100-L-48
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Keyway (C Face):||1/8 x 1/16||Service Factor:||1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output shaft:||Shaft|
|Reducer:||Worm - Right Angle||Ratio:||100:1|
|Input Style:||C-Face Coupled||Series Style:||GR-BM-L|
|Model Code:||BM813||Shaft Seal Material:||Viton|
|Output RPM:||17||Output Diameter (in):||0.625 in|
|Output Shaft Orientation:||L||Ratio Range:||100:1 to 250:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Housing material:||Cast Iron|
|Reducer Style:||Worm - Right Angle||Input RPM:||1,750|
|Output HP:||0.04||Output Shaft Assembly Code:||L|
|Mounting Style:||Base||Output Key:||3/16 x 1.50|
|Overhung Load:||700||Product Type:||Right Angle|
|No. of Gear Reductions:||Single||Input Diameter (in):||0.5 in|
|Center distance (inch):||1.33||Output Style:||L|
|Frame Size:||48||Output Torque:||143|
|Gear Drive Reductions:||Single||Input Bore (C Face):||0.5|