Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM813-5-L-48
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Key:||3/16 X 1.50|
|Input Style:||C-Face Coupled||Reducer Style:||Worm - Right Angle|
|Mounting Style:||Base||Output Shaft Assembly Code:||L|
|Output HP:||1.158||Output Shaft Orientation:||L|
|No. of Gear Reductions:||Single||Output Torque:||209|
|Input RPM:||1,750||Overhung Load:||700|
|Series Code:||GR||Frame Size:||48|
|Series Style:||GR-BM-L||Output Style:||L|
|Input HP:||1.248||Output RPM:||350|
|Input Bore (C Face):||0.5||Input Diameter (in):||0.5 in|
|Input Keyway (C Face):||1/8 x 1/16||Model Code:||BM813|
|Gear Drive Reductions:||Single||Product Type:||Right Angle|
|Series:||GR Series - Ironman Worm Gear Reducers||Shaft Seal Material:||Viton|
|Gear Type:||Worm||Output Diameter (in):||0.625 in|
|Housing material:||Cast Iron||Service Factor:||1|
|Input Keyway:||1/8 X 1.00||Ratio:||5:1|
|Center distance (inch):||1.33||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Assembly:||BM-L|
|Ratio Range:||5:1||Output shaft:||Shaft|