Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ813-50-D-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Style:||C-face Quill|
|Center distance (inch):||1.33||Series Style:||GR-BMQ-D|
|Assembly:||BMQ-D||Housing material:||Cast Iron|
|Output Key:||3/16 x 1.50||Output Torque:||327|
|Output HP:||0.182||Product Type:||Right Angle|
|Gear Type:||Worm||Service Factor:||1|
|Shaft Seal Material:||Viton||Frame Size:||56|
|Reducer:||Worm - Right Angle||Input Keyway (C Face):||3/16 x 3/32|
|No. of Gear Reductions:||Single||Output Diameter (in):||0.625 in|
|Ratio:||50:1||Gear Drive Reductions:||Single|
|Model Code:||BMQ813||Mounting Style:||Base|
|Output Shaft Orientation:||D||Output shaft:||Shaft|
|Input Bore (C Face):||0.625||Overhung Load:||700|
|Input Diameter (in):||0.625 in||Reducer Style:||Worm - Right Angle|
|Output RPM:||35||Input RPM:||1,750|
|Ratio Range:||50:1||Output Style:||D|
|Series:||GR Series - Ironman Worm Gear Reducers||Input HP:||0.285|
|Output Shaft Assembly Code:||D|