Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ813-20-D-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|No. of Gear Reductions:||Single||Output RPM:||87|
|Series Style:||GR-BMQ-D||Series Code:||GR|
|Mounting Style:||Base||Reducer Style:||Worm - Right Angle|
|Input Style:||C-face Quill||Output HP:||0.445|
|Frame Size:||56||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Overhung Load:||700||Keyway:||3/16 X 3/32|
|Output Style:||D||Input RPM:||1,750|
|Input HP:||0.551||Output Shaft Orientation:||D|
|Output Torque:||320||Output Key:||3/16 X 1.50|
|Output Shaft Assembly Code:||D||Output Diameter (in):||0.625 in|
|Input Keyway (C Face):||3/16 x 3/32||Gear Type:||Worm|
|Ratio Range:||20:1||Gear Drive Reductions:||Single|
|Input Diameter (in):||0.625 in||Product Type:||Right Angle|
|Assembly:||BMQ-D||Center distance (inch):||1.33|
|Service Factor:||1||Shaft Seal Material:||Viton|
|Reducer:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||0.625||Output shaft:||Shaft|
|Housing material:||Cast Iron||Input Quill Diameter (in):||0.625 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers|