Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ813-10-D-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input HP:||0.823||Input RPM:||1,750|
|Output Torque:||263||Frame Size:||56|
|No. of Gear Reductions:||Single||Output Shaft Assembly Code:||D|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Keyway:||3/16 X 3/32|
|Output Key:||3/16 X 1.50||Output HP:||0.729|
|Overhung Load:||700||Output Style:||D|
|Reducer Style:||Worm - Right Angle||Series Code:||GR|
|Series Style:||GR-BMQ-D||Output RPM:||175|
|Output Shaft Orientation:||D||Input Style:||C-face Quill|
|Mounting Style:||Base||Service Factor:||1|
|Center distance (inch):||1.33||Output Diameter (in):||0.625 in|
|Output shaft:||Shaft||Input Quill Diameter (in):||0.625 in|
|Gear Drive Reductions:||Single||Input Keyway (C Face):||3/16 x 3/32|
|Gear Type:||Worm||Shaft Seal Material:||Viton|
|Assembly:||BMQ-D||Input Bore (C Face):||0.625|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||10:1|
|Input Diameter (in):||0.625 in||Reducer:||Worm - Right Angle|
|Housing material:||Cast Iron|