Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ813-7.5-R-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Keyway:||3/16 X 3/32||Series Style:||GR-BMQ-R|
|Series Code:||GR||Output Shaft Orientation:||R|
|Output HP:||0.933||Output RPM:||233.33|
|Input RPM:||1,750||Output Torque:||252|
|Series Type:||Cast Iron 800 Worm Gear Reducers||No. of Gear Reductions:||Single|
|Frame Size:||56||Output Key:||3/16 X 1.50|
|Overhung Load:||700||Input Style:||C-face Quill|
|Input HP:||1.025||Reducer Style:||Worm - Right Angle|
|Output Style:||R||Output Shaft Assembly Code:||R|
|Mounting Style:||Base||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Product Type:||Right Angle|
|Gear Drive Reductions:||Single||Assembly:||BMQ-R|
|Center distance (inch):||1.33||Output Diameter (in):||0.625 in|
|Input Quill Diameter (in):||0.625 in||Input Bore (C Face):||0.625|
|Model Code:||BMQ813||Gear Type:||Worm|
|Reducer:||Worm - Right Angle||Ratio Range:||7.5:1|
|Input Keyway (C Face):||3/16 x 3/32||Series:||GR Series - Ironman Worm Gear Reducers|
|Ratio:||7.5:1||Input Diameter (in):||0.625 in|
|Housing material:||Cast Iron||Output shaft:||Shaft|
|Shaft Seal Material:||Viton|