Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ813-5-L-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Overhung Load:||700||Input HP:||1.248|
|Output RPM:||350||Output Shaft Orientation:||L|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Mounting Style:||Base|
|Output Torque:||209||Output Key:||3/16 X 1.50|
|Reducer Style:||Worm - Right Angle||Input RPM:||1,750|
|Frame Size:||56||No. of Gear Reductions:||Single|
|Keyway:||3/16 X 3/32||Series Code:||GR|
|Series Style:||GR-BMQ-L||Input Style:||C-face Quill|
|Output HP:||1.158||Output Shaft Assembly Code:||L|
|Output Style:||L||Model Code:||BMQ813|
|Input Keyway (C Face):||3/16 x 3/32||Ratio Range:||5:1|
|Output shaft:||Shaft||Series:||GR Series - Ironman Worm Gear Reducers|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Service Factor:||1|
|Ratio:||5:1||Input Bore (C Face):||0.625|
|Housing material:||Cast Iron||Gear Type:||Worm|
|Output Diameter (in):||0.625 in||Input Quill Diameter (in):||0.625 in|
|Input Diameter (in):||0.625 in||Shaft Seal Material:||Viton|
|Center distance (inch):||1.33||Product Type:||Right Angle|
|Assembly:||BMQ-L||Reducer:||Worm - Right Angle|
|Gear Drive Reductions:||Single|