- Sealmaster Skwezloc Concentric Lock Bearings
- Sealmaster USRB Klamploc Adapter Lock Bearings
- Sealmaster Mounted Ball Bearings Flyer - 9348E
- Unit Material Handling Metal Safety Cap - 9919E
- Sealmaster USRB Klamploc Adapter Lock Bearing - 10286E
- Sealmaster Next Generation Skwezloc Brochure - 10081E
- Material Handling Ball Bearing Install - 9016E
- Sealmaster USRB Installation Instruction Guide -10221E
Unit Material Handling Bearings

Sealmaster® Material Handling Mounted Ball Bearings
Sealmaster material handling mounted ball bearings feature cast iron housings and an extended inner race insert bearing with nylon retainer. The insert features a rivet to help prevent outer ring rotation and is available with setscrew or SKWEZLOC® concentric locking collar designed for commercial tolerance shafting and optional end cap. The contact seal, with black oxide treated flinger, provides a good balance between contaminant resistance, grease loss and friction. These bearings are available in common unit material handling industry bore sizes and housing configurations.
Unit Material Safety Cap for Sealmaster® Material Handling Bearings
The bearings are designed to accept either a plastic snap in or easy-to-install mechanically fastened metal safety caps. The caps are design to protect users from the exposed rotating shafts, reducing safety hazards around various types of equipment. These safety caps allow users to better conform to OSHA requirements.
Shaft Diameter | Size | Two Bolt Flange | Four Bolt Flange | Flange Bracket | Pillow Block |
1 7/16” | 23 | SFTMH-23T | SFMH-23T | FBMH-23T | NPMH-23T |
1 11/16” | 31 | SFTMH-31T | SFMH-31T | FBMH-31T | NPMH-31T |
2 7/16” | 39 | N/A | SFMH-39T | N/A | NPMH-39T |
Shaft Diameter | Setscrew and Old Skwezloc Tolerance Range | Skwezloc Upgraded Tolerance Range(Commercial Shafting) |
1/2” to 2” | +.0000 / -.0005” | +.000 / -.003” |
2 1/8” to 2 7/16” | +.0000 / -.0010” | +.000 / -.004” |
Related Documents



Sealmaster® USRB™ Klamploc™ Adapter Lock Bearings


The Sealmaster unitized spherical roller bearing is now available with the patented1 Klamploc tapered adapter lock. The Klamploc tapered adapter lock design reduces installation complexities versus standard designs and improves clamping force.
Shaft | |
Shaft Size (Inches) | Shaft Tolerance (Inches) |
Up to 2” | +.000 / -.003 |
2 3/16 to 4” | +.000 / -.004 |
4 7/16” to 5 15/16” | +.000 / -.004 |
Collar Rotation & Torque | |||
Shaft Size(Inches) | Locknut Rotation(Turns) | Cap Screw Torque(ft-lbs) | Hex Size(Inches) |
1 1/8 to 2 1/2” | 1/2 to 3/4 Turn | 7 | 5/32 |
2 11/16 to 3” | 1/2 to 3/4 Turn | 15 | 3/16 |
3 3/16 to 4 1/2” | 5/8 to 7/8 Turn | 25 | 1/4 |
4 15/16 to 5 7/16” | 5/8 to 7/8 Turn | 40 | 5/16 |