Right-Angle DC Gearmotors

SCR Rated - 5-135 In-Lbs. Torque

Low Voltage - 25-135 In-Lbs. Torque

 

General Specifications - SCR Rated Gearmotors:

• Performance matched for continuous duty service over 60:1 speed range
• Constant torque throughout the range when powered by a full-waveunfiltered SCR-type adjustablespeed control having a typical form factor of 1.3 to 1.4

 

General Specifications - Low Voltage Gearmotors:

• Performance matched for continuous duty service
• Designed for battery power or can be used with a low voltage controller with form factor up to 1.05

 

Features:

• Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation
• Precision machined aluminum gear housing
• Lubrication is permanent with an oil bath
• Gearbox has all ball bearings
• Output shaft is field interchangeable from left hand to right hand style by reassembly
• Double output shaft available as a factory option
• Optional conduit box available
• Optional gearbox base available (10 Series only)

 

Application Notes:

• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage oflubricant into the motor should the motor shaft seal fail
• These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For othermountings, the breather plug must be reoriented by using a 90°1⁄8" NPT taper pipe elbow. Regal does notoffer this elbow. It is not recommended to place the gearmotor with the gearbox shaft up.
• Overhung load capacities shown are at center of output shaft

 

Bravo^® Series 12 SUB-FHP - DC Right-Angle Gearmotors

 

General Specifications - SCR Rated Gearmotors:

• Performance matched for continuous duty service over 60:1 speed range
• Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 1.4

 

General Specifications - LowVoltage Gearmotors:

• Performance matched for continuous duty service
• Designed for battery power or can be used with a low voltage controller with form factor up to 1.05

 

Features:

• Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation
• Single piece die cast aluminum alloy housing is vacuum impregnated with Resinol RT for protection and sealing
• Light weight gearbox combines high tensile strength along with being precision machined for alignment of bearings and gearing
• High temperature nitrile seals for optimum seal life
• Gearbox provided with solid output shaft, but can be converted to a hollow output shaft. Simply remove the solid shaft by removing the snap rings
• T-base feet provided are removable to convert to face mounting
• Optional conduit box available