Evergreen® EM Motors
The Evergreen® EM motor is a drop-in replacement for OEM constant torque ECM indoor blower motors such as Genteq X13® and Endura® Pro motors or equivalent competitor models with 24 VAC speed taps.
Features
- Pre-programmed for truck stock; ready to use out of the box
- No complex wiring or configuration
- Automatically determines motor direction using Regal's Rotation Sensing Technology™
- Compatible with OEM harness
Benefits
- Two year warranty*
- Maintains system efficiency and performance
- Soft start and off ramp for quiet operation
*This warranty shall expire twenty-four (24) months from first use of the Product or thirty (30) months from date of shipment of the Product, whichever occurs first. Except as stated here, Regal standard limited warranty applies. See Terms and Conditions of Sale.
Specifications
Evergreen® EM Motors
| STOCK | HP | VOLTS | FLA | RPM | SPEEDS | SHAFT | DIM A | DIM B |  |
|---|---|---|---|---|---|---|---|---|---|
| 6103E | 1/3 | 115 | 4.8 | 1075 | 5/PWM | .5" x 5"(4.5" SF) | 10.17" |
5.25" | |
| 6105E | 1/2 | 115 | 6.8 | 1075 | 5/PWM | .5" x 5"(4.5" SF) | 10.67" | 5.75" | |
| 6107E | 3/4 | 115 | 8.4 | 1075 | 5/PWM | .5" x 5"(4.5" SF) | 11.42" | 6.5" | |
| 6110E | 1 | 115 | 10.9 | 1075 | 5/PWM | .5" x 5"(4.5" SF) | 12.17" | 7.25" | |
| 6203E | 1/3 | 208-230 | 2.8 | 1075 | 5/PWM | .5" x 5"(4.5" SF) | 10.17" | 5.25" | |
| 6205E | 1/2 | 208-230 | 4.1 | 1075 | 5/PWM | .5" x 5"(4.5" SF) | 10.67" | 5.75" | |
| 6207E | 3/4 | 208-230 | 6 | 1075 | 5/PWM | .5" x 5"(4.5" SF) | 11.42" | 6.5" | |
| 6210E | 1 | 208-230 | 7.6 | 1075 | 5/PWM | .5" x 5"(4.5" SF) | 12.17" | 7.25" |
Applications
- Residential and light commercial indoor furnaces
- Air handler and package units
Reliability
- Encapsulated electronics
- Electronic overload protection
- 4kV surge protection
- UL and CSA recognized component
Motor mounts for Evergreen® motors
All Evergreen® motors are NEMA® 48-frame (5.6" diameter). If the motor you're replacing has the same frame dimensions and uses a belly band mount, an Evergreen motor will fit in the existing mount.
A new motor mount may be required if the old mount is connected to the motor around the bearing(resilient mount) or welded or bolted directly to the motor shell.
To determine the bolt hole diameter needed, measure the diameter of the air inlet. The bolt hole dimension must be larger than this dimension.
Genteq® Mounting Kits
- Catalog #GA556: 9-10" bolt circle torsion flex, NEMA® 48 Frame (5,6" dia.) 3 legs, Not Recommended for 3/4 HP or 1HP motors
- Catalog #5K002: OEM mount with 4 legs
- Catalog #5K003: 10" bolt circle
- Catalog #5K004: 11" bolt circle, NEMA® 48 Frame (5,6" dia.) 3 legs
- Catalog #5K005: 13" bolt circle, NEMA® 48 Frame (5,6" dia.) 4 legs
Dealer Toolbelt App
Download the Dealer Toolbelt app and gain access to technical literature, training videos, and ECM cross reference: Apple Store.
HVAC motor replacement options by type and application
| APPLICATION | INDOOR BLOWER MOTORS |
EVERGREEN® MOTOR MODEL | ||
|---|---|---|---|---|
| Furnace Air Handlers (Includes Package Systems)  |
 |
Induction Motors (Shaded Pole or PSC) typically built with two brown or purple run capacitor wires. |
 |
Evergreen® IM Motors |
 |
Constant Torque ECM Motors (Genteq® models X13® or Endura® Pro motors or equivalent competitors product with 24 VAC speed taps). |  |
Evergreen® EM Motors, Evergreen® CM Motors |
|
 |
Constant Airflow (Variable Speed) ECM Motors (model 2.0, Genteq® models 2.3 or Eon® motors). |  |
Evergreen® VS Motors & User Interface | |
 |
Constant Airflow (Variable Speed) ECM Motors (Genteq® motor model 3.0). |  |
Evergreen® VS Motors | |
| Constant Airflow (Variable Speed) ECM Motors (Genteq® motor model 2.5 motor). |
Genteq® motor model 2.5 must be replaced with an OEM part from the manufacturer of the HVAC system they were removed from. | |||
The following are believed to be the trademarks and/or trade names of their respective owners and are not owned or controlled by Regal Beloit Corporation. UL: UL LLC; CSA: CSA Group; NEMA: National Electrical Manufactures Association;
Introduction to Genteq® Evergreen® Motors
Genteq® Evergreen® motors are the smartest choice in the aftermarket, offering ECM replacement with minimal inventory burden, fast and easy installation, and energy savings, which in turn increases the value for the dealer, installer and homeowner.
Introduction to Genteq® Evergreen® EM Motors
In this video we cover the features and benefits of Genteq® Evergreen® EM Motors including application and product specifications. The Genteq Evergreen EM motor is a drop-in replacement for constant torque ECM such as Genteq X13® and Endura® Pro motors or equivalent competitor models with 24 VAC speed taps. The Evergreen EM motor is preprogrammed at the factory to provide the same comfort, lower utility bills and air quality as the OEM X13 ECM motor.
Genteq® Evergreen® EM Motor Installation
Genteq® Evergreen® EM motor installation guidelines including application and product specifications, mechanical installation and electrical connection. The Genteq Evergreen EM motor is a drop-in replacement for constant torque ECM such as Genteq X13® and Endura® Pro motors or equivalent competitor models with 24 VAC speed taps. The Evergreen EM motor is preprogrammed at the factory to provide the same comfort, lower utility bills and air quality as the OEM X13 ECM motor.
Genteq® Evergreen® motors are the smartest choice in the aftermarket, offering ECM replacement with minimal inventory burden, fast and easy installation, and energy savings, which in turn increases the value for the dealer, installer and homeowner.
In this video we cover the features and benefits of Genteq® Evergreen® EM Motors including application and product specifications. The Genteq Evergreen EM motor is a drop-in replacement for constant torque ECM such as Genteq X13® and Endura® Pro motors or equivalent competitor models with 24 VAC speed taps. The Evergreen EM motor is preprogrammed at the factory to provide the same comfort, lower utility bills and air quality as the OEM X13 ECM motor.
Genteq® Evergreen® EM motor installation guidelines including application and product specifications, mechanical installation and electrical connection. The Genteq Evergreen EM motor is a drop-in replacement for constant torque ECM such as Genteq X13® and Endura® Pro motors or equivalent competitor models with 24 VAC speed taps. The Evergreen EM motor is preprogrammed at the factory to provide the same comfort, lower utility bills and air quality as the OEM X13 ECM motor.
Designed specifically for Evergreen EM and CM models, the Evergreen® InTune® WIFI Programmer saves time giving you real-time wireless control of the motor.
Previous
Next