E920 Mounted Tapered Roller Bearings
Tapered Roller Bearings
Browning® E920 Series mounted tapered roller bearings are available from 1 3/16" to 5". They are available in the following housing styles:
- Two bolt pillow blocks
- Four bolt pillow blocks
- Four bolt flange
Heavy Duty Tapered Roller Bearings
Heavy duty tapered roller bearings for radial, thrust and combination loading.
One-Piece Cast Iron Housing
Durable one-piece cast iron housings provide support load.
Rubber contact face riding seals rotate with the shaft to help retain lubricant and help exclude contaminants.
Collar Mount System
Two locking collars are standard on all units with two setscrews at 120° for balanced three point contact and holding power. Locking collars are black oxide treated.
All units are completely assembled, adjusted and lubricated at the factory and are ready for use.
- Pillow Block, Flanges, Take Up Assemblies
Bore Size Range
- 1 3/16” - 5"
- Cast Iron
The Browning® E920 series mounted tapered roller bearings feature durable one-piece non-expansion housings with Type E mounting dimensions and limited misalignment.
E920 series bearings include setscrew locking collars for easy installation. They also contain a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
|Series||Housing Style||Double Lock Collar||Single Lock Collar||Housing Material||Standard Seal||Seal Options||Inch||Metric|
|PBE920||Two Bolt Pillow Block||PBE920||N/A||Cast Iron||Contact||N/A||1 3/16" - 3 1/2"||N/A|
|PBE920F||Four Bolt Pillow Block||PBE920F||N/A||Cast Iron||Contact||N/A||2 1/4"- 5"||N/A|
|FBE920||Flange Block||FBE920||N/A||Cast Iron||Contact||N/A||1 3/16" - 4"||N/A|
|TUE920||Take Up||TUE920||N/A||Cast Iron||Contact||N/A||1 3/8" - 4 7/16"||N/A|
|T1000||Take Up Frame||N/A||N/A||N/A||N/A||N/A||1 1/2" - 4 1/2"||N/A|