Solutions

The solutions we create—whether for the commercial, industrial or residential markets—cover nearly every aspect of life. From electric motors and generators to gear drives and valve actuators, our products and motion control systems are essential—not optional—to the functioning of much of the equipment powering our planet.

  • Results per page:
  • 5
  • |
  • 10
  • |
  • 50
We Know Steel!

Our brands are at the heart of a primary metals mill. From AC drives and controls, to bearings and couplings, to motors and mechanical drive systems, Regal brands have you covered in the toughest and dirtiest of applications.

Test Rigs and Industrial Machinery Solution

At the heart of a converting operation is the slitter machine, whereby rolls of paper are cut into smaller more commercially viable product. The paper passes through the slitter which contains knives or lasers that slit the paper before being rewound on one or more shafts. These machine require a high level of automation and operate at extremely high speeds.

Refrigeration Solution

The compressor is a key element in a vapor refrigeration system. It is used to pump the refrigerant from the cold side to the hot side of the system. The heat absorbed by the refrigerant in the evaporator is then removed before the refrigerant cycle can start again.

Pulp Paper and Forestry Solution

The traditional paper machine drive train for fixed rolls consists of a motor connected to a reducer with a close coupled gear type coupling. The reducer is then connected to the paper machine roll with a floating shaft gear coupling. These couplings transmit motor torque and accommodate shaft misalignment, but they are a maintenance nightmare and very inefficient.

Power Generation Fossil Solution

A powerhouse contacted the Regal team regarding the monitoring of Kop-Flex® couplings to improve performance along with monitoring critical operations within the operation. Past practices were to walk the plant, looking for problems, and to have a reactive maintenance model versus a proactive forward looking monitoring system. However, as maintenance budgets were cut, the frequency of coupling failures and the need for coupling replacements and repairs increased.

  • Results per page:
  • 5
  • |
  • 10
  • |
  • 50
Recent Innovations
Test Stand

With the design cycle for engines and transmission accelerating due to technology advances with compressing deliverables being driven by competitive pressure and regulations conventional transmission test rigs have become inadequate to present demands.

Dry End Manager

The DEM connects a wide variety of system components from different manufacturers, including rotary shears, slitter/scorers, stackers, auxiliary cross cutters, microwave heaters, displays, pallet printers, bridge rate controllers, splice synchronizers, wet-end controllers and host computers.

New Generation of Coupling

Rolling mills are tough, dirty places requiring hardened products that are as tough as the applications they operate in. Downtime and maintenance are two of the key drivers of plant profitability. Couplings are a critical component to these operations. The Metals Industry Technology team at Regal® were asked to develop a new generation of couplings that meets the demands of the rolling mill.