Kop-Flex KD disc couplings reduce overall operating costs... period. With no
wearing parts or lubrication required, Kop-Flex KD couplings dramatically reduce
coupling maintenance, so you can focus on other mill concerns. No more late-night
phone calls about gear coupling failures due to lubrication – with your new
Kop-Flex KD couplings, it’s possible to inspect the flexible discs without shutting
down your equipment – a feat not possible with gear couplings.
PROVEN COST SAVINGS
At one paper mill, the labor cost per shaft was
calculated at $600 per year with an additional
$87 per year allocated toward grease and O-rings
for existing gear couplings. With 144 gear
couplings in service at the mill between two lines,
a complete interchange to KD couplings could
yield a savings of $98,928 per year in maintenance
MAXIMIZE ROI WITH KD
Contact Regal to find out more about accounting
for labor rates, maintenance costs, maintenance
schedules and required parts and lubricants, and
the ROI that can result from changing out gear to
disc couplings in your mill.
ADDITIONAL SAVINGS OFFER
For a limited time, get 20% off on any KD
coupling that replaces a competitor’s coupling.
5 YEAR WARRANTY
(FROM DATE OF SHIPMENT)
Kop-Flex couplings are warranted for 5 years
only if proper installation and maintenance
are maintained per Kop-Flex installation and
maintenance instruction sheets. For more
product information, visit https://www.regalbeloit.
com/Brands/Kop-Flex or 410-768-2000
SPACER DISC COUPLING
CLOSE COUPLED DISC COUPLING